How To Hang LED Strip On Wall Without Adhesive

LED strips are all good while they are on the wall. The real problem begins while peeling them off. Yes, I got that same messy wall like everyone who has attached LED strips on the wall with strong adhesive. 

After that incident, I just started hanging my LED strip on the wall without adhesive. If you want to know how to hang LED strips on a wall without adhesive, this article is for you. 


You can use LED strip mounting clips, channels & LED strips with pre-built holes to hang them on the wall without adhesive. By following these three methods, you won’t damage your wall paint whenever you change your LED light strips. 

In this article, I will be discussing the three methods I just mentioned above. Besides, I’ll be giving you some solution that contains adhesive but won’t damage your paint or leave any residue. If you already used adhesive and want solution to remove it without damaging your paint then you can check out my this article.

How To Hang LED Strip On Wall Without Adhesive: Top 3 Methods

Though there are many ways out there, I’ll be explaining the top three ways of hanging LED strips on a wall without adhesive. Without further ado, let’s get started: 

1. LED Light Strip Mounting Clips

We are all familiar with outside wires running over our walls by supportive clips. You can use similar clips to hang your LED light strips as well. However, there is a slight difference between wire mounting clips & LED light strip mounting clips – be conscious while buying.  I have found Griver Mounting Clips (Amazon) work great for led strips light you can also give it a try.

Q: When Should You Use LED Light Strip Mounting Clips? 

If you’re looking for an alternative to adhesive & don’t want to spend much, LED light strip mounting clips will be the best solution for you. 

2. LED Light Strip Mounting Channel

If mounting clips aren’t your cup of tea, you can try LED strip mounting channels. These are simply U-shaped anodized aluminum channels in which you’ll be placing your LED strips. If you want my recommendation for choosing an Led strip mounting channel then I would suggest Starlandled Aluminum Channel (Amazon).

Follow these steps for your setup:

  • Step 1: Take the aluminum channel & drill it to the location you’re intending to hang the LED strip. 
  • Step 2: Slide your LED strip to the aluminum channel.
  • Step 3: Now cover those LED strips with the given covers with the LED light mounting channel.

Note: Re-do the following three steps over and over & you can hang all of your LED light strips with ease. 

Q: When Should You Use LED Light Strip Mounting Channel? 

If you are very cautious about beauty & don’t hesitate to spend more on an LED strip setup, LED light strip mounting channels will be the best solution for you. 

3. Use Magnets & Screws 

You can make your adhesive-free LED strip setup more neat & clean by using magnets. Follow these steps for your setup: 

  • Step 1: First you need to drill into the wall, then insert metal screws into your walls in a nice order. 
  • Step 2: Get yourself rare-earth small rounded magnets 
  • Step 3: Glue some of the magnets to your LED light strips. Make sure you match the distance between wall screws & your LED strip magnets. 
  • Step 4: Simply hang your LED strip on the wall. 

By following these four steps, you can easily hang an LED light strip on the wall without adhesive. 

Q: When Should You Use Magnets & Screws? 

If you’re on a budget & still want to make the LED light appealing without using adhesive, you can consider this method of magnet & screws. 

Adhesive Solution That Won’t Damage Your Wall Paint

If you don’t want to use adhesive just because it might damage your wall paint, I’ve good news for you. I’ve mentioned some of the adhesive-integrated solutions which are both cheap & safe for your wall paint. 

1. Double Sided Tape

Most LED strips come with 3M adhesives, which can damage your paint while you’re peeling them off. However, if you use quality double-sided tape – it won’t damage your wall paint & will surely last longer. 

2. Command Strips 

If you don’t want any residue on your wall when you remove the LED light strips, you can use command strips. Command strips will help you hang your LED light strips safely & they won’t leave any residue when you’re peeling off the strips. If you don’t have command strips in your home then you can check out these strips Mini Light Adhesive Strips (Amazon).

3. Mounting Putty

You can also use a mounting putty (Amazon) to hang your LED strip on the wall. Mounting putty is the only adhesive that is reusable. Also, you can peel off the mounting putty whenever you want & it won’t leave any mark on the wall. 

Frequently Asked Questions – FAQs

Can You Put Scotch Tape Over LED Strips? 

No, can’t & shouldn’t put scotch tape over your LED strips. Scotch tapes come with one-sided adhesive, meaning you’ll need to overlap LED lights to hang them somewhere. That’s why double-sided tape is the best for LED strips. 


I hope this article was helpful enough to satisfy your queries regarding hanging LED strips on walls without adhesive. Based on your budget, I’ve shown you some ways of doing it. 

Also, I’ve left some ways which are cheap & won’t damage your wall paint. Feel free to utilize those methods if you’re planning on changing your LED strips frequently. 

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.